Definition
Load sharing distributes active (kW) and reactive (kVAR) power among paralleled generators. Droop method: each generator's speed governor and AVR have a slight droop characteristic — load naturally distributes proportionally. Isochronous load sharing: electronic load share lines between controllers provide precise, equal sharing (±2%). Essential for stable parallel operation.
What is Load Sharing — Paralleled Generator kW & kVAR Distribution
Overview
Load sharing distributes active (kW) and reactive (kVAR) power among paralleled generators. Droop method: each generator's speed governor and AVR have a slight droop characteristic — load naturally distributes proportionally. Isochronous load sharing: electronic load share lines between controllers provide precise, equal sharing (±2%). Essential for stable parallel operation.
Operating Principles
Understanding how this electrical component functions within the generator system is essential for troubleshooting and maintenance.
Applications in Generator Systems
This component is found in virtually all modern diesel generator sets, from small 10 kVA portable units to large 3000 kVA industrial installations.
| Parameter | Typical Value | Tolerance | Notes |
|---|---|---|---|
| Voltage | Per rating | ±1% | AVR regulated |
| Frequency | 50/60 Hz | ±0.5% | Governor controlled |
| Current | Per load | — | Depends on application |
| Generator Type | Application | This Component Role | Special Requirement |
|---|---|---|---|
| Standby | Backup power | Standard | Reliability focus |
| Prime | Continuous | Heavy duty | Durability |
| Marine | Shipboard | Corrosion-resistant | Class approved |
| Mobile | Portable | Lightweight | Rugged |
| Maintenance Task | Frequency | Procedure | Warning |
|---|---|---|---|
| Inspection | Monthly | Visual check | Disconnect power |
| Testing | Quarterly | Electrical measurement | Use proper PPE |
| Cleaning | Annually | Remove dust/debris | De-energize |
| Replacement | As needed | Per OEM manual | Use OEM parts |
Key Takeaways
- Load Sharing — Paralleled Generator kW & kVAR Distribution is a critical component of generator electrical systems.
- Modern designs incorporate advanced materials and digital controls for improved performance.
- Regular testing and calibration ensure reliable operation and protection.
- Understanding this component's function aids in troubleshooting and maintenance planning.
Quick Reference
- Standards: IEC 60034, ISO 8528
- Voltage: Typically 400/230V or 480/277V
- Frequency: 50 Hz or 60 Hz per regional standard
Frequently Asked Questions
What is AVR in a generator?
AVR (Automatic Voltage Regulator) maintains generator output voltage within ±1% of setpoint regardless of load changes. It senses output voltage, compares to reference, and adjusts exciter field current. Modern digital AVRs offer soft start, voltage matching, and Modbus communication.
What is biodiesel?
Biodiesel is a renewable fuel made from vegetable oils, animal fats, or recycled cooking oil through transesterification. B20 (20% biodiesel) is compatible with most diesel engines. B100 requires engine modifications: heated fuel lines, compatible seals, and more frequent oil changes.
How does a diesel engine work?
A diesel engine is a compression-ignition internal combustion engine. Air is compressed to high pressure and temperature, then diesel fuel is injected into the hot compressed air, causing spontaneous ignition. It operates on the Diesel cycle: intake (air only), compression, power (fuel injection + combustion), exhaust.
What is IP rating?
IP (Ingress Protection) rating indicates enclosure protection against solids and liquids. IP44: spray water protection, standard outdoor. IP54: dust protected + spray water. IP65: dust tight + water jets. Generator enclosures typically IP44-IP65. Marine/military may require IP66-IP68.
What is a transfer switch?
An ATS (Automatic Transfer Switch) automatically switches load between utility and generator. Types: open transition (standard), closed transition (make-before-break, seamless), soft-loading. NFPA 110 Level 1 requires <10 second transfer for life safety applications.
What is Modbus?
Modbus is an open serial communication protocol widely used in industrial automation. RTU mode (8 data bits, RS-485) is standard for generator controllers. Registers map to generator parameters: holding registers for setpoints, input registers for measurements. Most controllers support Modbus RTU as their primary integration protocol.
What is genset derating?
Derating reduces generator rated output for environmental conditions. Factors: altitude (1% per 100m above 1000m), temperature (1% per 10°C above 25°C), humidity. For example: at 40°C and 2000m altitude, a 500 kW generator may only produce 420 kW. Always apply manufacturer's derating tables.
What is a common rail fuel system?
Common rail injection maintains fuel at constant high pressure (up to 2500 bar) in a shared rail, with electronically controlled injectors. Advantages: precise injection timing (multiple events per cycle), better atomization, lower emissions, quieter operation, and 5-8% better fuel efficiency vs mechanical injection.
What is a heat exchanger?
A heat exchanger transfers engine heat to a secondary cooling circuit (often a cooling tower or raw water). Used in marine and stationary applications where direct radiator cooling is impractical. Shell-and-tube or plate type. Secondary circuit must handle the engine's total heat rejection.
What is a turbocharger?
A turbocharger uses exhaust gas energy to compress intake air, increasing engine power density. It consists of a turbine (driven by exhaust) connected to a compressor (forces air into cylinders). Turbocharged diesel engines produce 30-50% more power than naturally aspirated engines of same displacement.
What is a load bank?
A load bank is a device that applies artificial electrical load to a generator for testing. Types: resistive (kW only), reactive (kVAR), resistive/reactive combined. Used for: commissioning tests, periodic exercise (prevents wet stacking), and troubleshooting. Load bank testing at 75-100% load for 1-2 hours is recommended monthly for standby generators.
What is an alternator vs generator?
Technically: alternator produces AC, generator produces DC. Colloquially, 'generator' refers to the complete genset. Alternator components: stator (stationary windings), rotor (rotating field), exciter (provides DC to rotor via brushless excitation). Modern alternators are self-excited brushless synchronous machines.
What is a diesel generator?
A diesel generator converts the chemical energy in diesel fuel into electrical energy. It consists of a diesel engine (prime mover) and an alternator (generator) mounted on a common base frame. The engine rotates the alternator rotor, producing alternating current via electromagnetic induction.
What is engine displacement?
Engine displacement is the total swept volume of all engine cylinders (bore x stroke x number of cylinders). Measured in liters (L) or cubic inches (in³). Example: Cummins QSK60 has 60L displacement. Larger displacement generally produces more power, but turbocharging enables smaller engines to match larger naturally aspirated ones.
What is a brushless exciter?
A brushless exciter eliminates slip rings and brushes by using a rotating rectifier assembly. The exciter stator produces AC, which is rectified to DC on the rotating assembly, feeding the main rotor. Benefits: no brush maintenance, no carbon dust, suitability for hazardous areas. This is the standard for modern generators.
Looking for diesel generators with these components?
Visit HuaQuan Power →